HSN code for Zinc and Zinc articles

Posted on 10 June 2022 Category : HSN Codes for GST

HSN code CHAPTER-79

Zinc and articles thereof

The information provided below about HSN codes are used for GST purpose to classify goods. You may reconfirm with GST authorities whether your product HSN code is classified correctly below. The HSN codes under 02 digits, 04 digits, 06 digits and 08 digits explains and classifies broadly for each section of goods.

Note:

In this Chapter, the following expressions have the meanings hereby assigned to them:

(a) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

(b) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section

along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along them whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.

(d) Plates, sheets, strip and foil

Flat-surfaced products (other than the unwrought products of heading 7901 00 00), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two being straight, of equal length and parallel) of a uniform thickness, which are:

i. of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;

ii. of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Heading 7905 00 00, applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

(e) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waited, expanded, cone-shaped or fitted with flanges, collars or rings.

HSN Code Description of goods

HSN code 7901 Unwrought zinc

                Zinc, not alloyed :
7901 11 00        --    Containing by weight 99.99% or more of zinc
7901 12 00        --    Containing by weight less than 99.99% of zinc
7901 20        -    Zinc alloys :
7901 20 10    ---    Mozak or alloys of zinc and aluminium
                              containing not less than 94% by weight
                              of zinc
7901 20 90        ---    Other

HSN code 7902 Zinc waste and scrap

7902 00    -    Zinc waste and scrap :
7902 00 10    ---    Zinc scrap, namely the following :
        old zinc die cast scrap covered by ISRI code word
        ‘Saves’; new zinc die cast scrap covered by ISRI
        code word ‘Scabs’; new plated zinc die cast scrap
        covered by ISRI code word ‘Scope’; zinc die cast
        automotive grills covered by ISRI code word ‘Scoot’;
        Old scrap zinc covered by ISRI code word ‘Score’;
        New zinc clippings covered by ISRI code word
        ‘Screen’; zinc die cast slabs or pigs covered by ISRI
        code word ‘Scull’; crushed clean sorted
        fragmentizers die cast scrap, as produced from
        automobile fragmentizers covered by ISRI code
        word ‘Scribe’;
        Hot dip galvanizers slab zinc dross (batch
        process) covered by ISRI code word ‘Scrub’
        (minimum 92% zinc) – free of skimmings;
        continuous line galvanizing slab zinc top dross
        covered by ISRI code word ‘Seal’ (minimum 90%
        zinc) – free of skimmings;
        continuous line galvanizing slab zinc bottom
        dross covered by ISRI code word ‘Seam’
        (minimum 92% zinc) – free of skimmings; prime
        zinc die cast covered by ISRI code word ‘Shelf’
        (85% zinc) – free from corrosion or 'oxidation';
        Unsorted Zinc die cast scrap produced from
        automobile fragmentizers containing about 55%
        zinc-bearing scrap covered by ISRI code word
    ---    'Scroll'
7902 00 90        OTHER

HSN code 7903 Zinc dust, powders and flakes

7903 10 00 - Zinc dust
7903 90 00 - Other

HSN code 7904 Zinc bars, rods, profiles and wire

7904 00    -    Zinc bars, rods, profiles and wire :
    ---    Bars and rods :
7904 00 11    ----    Hollow bars
7904 00 12    ----    Rods, including wire rods
7904 00 19    ----    Other
    ---    Profiles :
7904 00 21    ----    Hollow
7904 00 22    ----    Angles, shapes and sections
7904 00 29    ----    Other
7904 00 30    ---    Wire

HSN code 7905 Zinc plates, sheets, strip and foil

7905 00    -    Zinc plates, sheets, strip and foil :
7905 00 10    ---    Calots
7905 00 20    ---    Plates
7905 00 30    ---    Sheets, strip and circles
7905 00 40    ---    Foil

HSN code 7907 Other articles of zinc

7907 00 - Other articles of zinc :

HSN code 7907 00 10 Sanitary fixtures

HSN code 7907 00 90 Other

Click here to know GST rate on Goods and Services

GST Exemption list of goods and services

Find HSN number or Service tariff code for GST

GST registration guidelines

Indian GST Laws

How to export your goods?

Useful information about GST:

Refund of Input Tax Credit (ITC) of GST, FAQ
Migration procedures for existing VAT payers to GST online in India
Refund of GST paid in India, FAQ
4 Conditions when applying for refund of Input Tax Credit (ITC) under GST
Enrolling an existing VAT taxpayers at the GST Common Portal
Difference between types of goods and services and types of GST
4 types of Goods and Services in India for GST rate
Difference between IGST on International goods and IGST on domestic goods.