HSN code CHAPTER-39
Plastics and articles thereof
The information provided below about HSN codes are used for GST purpose to classify goods. You may reconfirm with GST authorities whether your product HSN code is classified correctly below. The HSN codes under 02 digits, 04 digits, 06 digits and 08 digits explains and classifies broadly for each section of goods.
Notes:
1. Throughout this Schedule, the expression "plastics" means those materials of headings 3901 00 00 to 3914 00 00 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence. Throughout this Schedule any reference to "plastics" also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI.
2. This Chapter does not cover:
(a) lubricating preparations of heading 2710 00 00 or 3403 00 00;
(b) waxes of heading 2712 00 00 or 3404 00 00;
(c) separate chemically defined organic compounds (Chapter 29);
(d) heparin or its salts (heading 3001 00 00);
(e) solutions (other than collodions) consisting of any of the products specified in headings 3901 00 00 to 3913 00 00 in volatile organic solvents when the weight of the solvent exceeds 50% of the weight of the solution (heading 3208 00 00); stamping foils of heading 3212 00 00;
(f) organic surface-active agents or preparation of heading 3402 00 00;
(g) run gums or ester gums (heading 3806 00 00);
(h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811 00 00);
(i) prepared hydraulic fluids based on polyglycols, silicones or other polymers of
Chapter 39 (heading 3819 00 00);
(j) diagnostic or laboratory reagents on a backing of plastics (heading 3822 00 00);
(k) synthetic rubber, as defined for the purpose of Chapter 40, or articles thereof;
(l) plaits, wickerwork or other articles of Chapter 46;
(m) wall coverings of heading 4814 00 00;
(n) run gums or ester gums (heading 3806 00 00);
(p) goods of Section XI (textiles and textile articles);
(q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking-sticks, whips, riding crops or parts thereof);
(r) imitation jewellery of heading 7117 00 00;
(s) articles of Section XVI (machines and mechanical or electrical appliances);
(t) parts of aircraft or vehicles of Section XVII;
(u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing
instruments);
(v) articles of Chapter 91 (for example, clock or watch cases);
(w) articles of Chapter 92 (for example, musical instruments or parts thereof);
(x) articles of Chapter 94 (for example, furniture, lamps and lighting fittings, illuminated signs, prefabricated buildings);
(y) articles of Chapter 95 (for example, toys, games, sports requisites); or
(z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils).";
3. Headings 3901 00 00 to 3911 00 00 apply only to goods of a kind produced by chemical synthesis, falling in the following categories:
(a) liquid synthetic polyolefin of which less than 60% by volume distils at 300°C, after conversion to 1,013 mill bars when a reduced pressure distillation method is used (headings 3901 00 00 and 3902 00 00);
(b) resins, not highly polymerised, of the coumarone-indene type (heading 3911 00 00);
(c) other synthetic polymers with an average of at least 5 monomer units;
(d) silicones (heading 3910 00 00);
(e) resoles (heading 3909 00 00) and other prepolymers.
4. The expressions "copolymers" covers all polymers in which no single monomer unit
contributes 95% or more by weight to the total polymer content. For the purposes of this Chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer bends are to be classified in the heading covering polymers of that commoner unit which predominates by weight over every other single commoner unit. For the purposes of this Note, constituent commoner units of polymers falling in the same heading shall be taken together. If no single commoner unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration.
5. Chemically modified polymers, that is those in which only appendages to the main polymer chain has been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers.
6. In headings 3901 00 00 to 3914 00 00, the expression "primary forms" applies only to the following forms:
(a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions;
(b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms.
7. Heading 3915 00 00 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 00 00 to 3914 00 00).
8. For the purposes of heading 3917 00 00, the expression "tubes, pipes and hoses" means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last-mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes.
9. For the purposes of heading 3918 00 00, the expression "wall or ceiling coverings of plastics" applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated.
10. In headings 3920 00 00 and 3921 00 00, the expression "plates, sheets, film foil and strip" applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use).
11. Heading 3925 00 00 applies only to the following articles, not being products covered by any of the earlier headings of sub-Chapter II:
(a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 3001 00 00;
(b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs;
(c) gutters and fittings thereof;
(d) doors, windows and their frames and thresholds for doors;
(e) balconies, balustrades, fencing, gates and similar barriers;
(f) shutters, blinds (including Venetian blinds) and similar articles and parts and fittings thereof;
(g) large scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses;
(h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and
(i) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates.
HSN Code Description of goods
HSN code 3901 I Primary forms
Polymers of ethylene, in primary forms
3901 10 - Polyethylene having a specific gravity of
less than 0.94 :
3901 10 10 --- Linear low density polyethylene (LLDPE)
3901 10 90 --- Other
3901 20 00 - Polyethylene having a specific gravity of
0.94 or more
3901 30 00 - Ethylene-vinyl acetate copolymers
3901 90 - Other:
3901 90 10 --- Linear medium density polyethylene
(LMDPE)
3901 90 90 --- Other
HSN code 3902 Polymers of propylene or of other olefins, in primary forms
3902 10 00 - Polypropylene
3902 20 00 - Poly iso butylene
3902 30 00 - Propylene copolymers
3902 90 00 - Other
HSN code 3903 Polymers of styrene, in primary forms
- Polystyrene:
3903 11 00 -- Expansible
3903 19 -- Other :
3903 19 10 --- Moulding Powder
3903 19 90 --- Other
3903 20 00 - Styrene-acrylonitrile (SAN) copolymers
3903 30 00 - Acrylonitrile-butadine-styrene (ABS)
copolymers
- Other :
3903 90 10 --- Copolymers, solely of styrene with allyl
alcohol, of any acetyl value of 175 or more
3903 90 20 --- Brominated polystyrene, containing by
weight 58% or more but not more than 71%
of bromine, in one of the forms mentioned
in Note 6(b) to this Chapter
3903 90 90 --- Other
HSN code 3904 Polymers of vinyl chloride or of other halogenated olefins,
in primary forms
3904 00 - Poly (vinyl chloride), not mixed with any
3904 10 10 other substances:
--- Binders for pigments
3904 10 90 --- Other
- Other poly (vinyl chloride)
3904 21-- Non-plasticised:
3904 21 10 --- Poly (vinyl chloride) resins
3904 21 90 --- Other
3904 22 -- Plasticised:
3904 22 10 --- Poly (vinyl chloride) (PVC) Resins
3904 22 90 (emulsion grade)
--- Other
3904 30 - Vinyl chloride-vinyl acetate copolymers
3904 30 10 --- Poly (vinyl derivatives)
3904 30 90 --- Other
3904 40 00 - Other Vinyl chloride copolymers
- Vinylidene chloride polymers:
3904 50 10 --- Copolymer of vinylidene chloride with
acrylonitrite, in the form of expansible
beads of a diameter of 4 micrometers
or more but not more than 20 micrometers
3904 50 90 --- Other
- Fluro-polymers :
3904 61 00 -- Polytetrafluroethylene
-- Other :
3904 69 10 --- Poly (vinyl fluoride), in one of the forms
mentioned in Note 6(b) to this Chapter
3904 69 90 --- Other
3904 90 00 - Other
HSN code 3905 Polymers of vinyl acetate or of other vinyl esters, in
primary forms; other vinyl polymers in primary forms
- Poly (vinyl acetate) :
3905 12-- In aqueous dispersion:
3905 12 10 --- Poly (vinyl acetate) (PVA), moulding material
3905 12 20 --- Poly (vinyl acetate) resins
3905 12 90 --- Other
3905 19 -- Other :
3905 19 10 --- Poly (vinyl acetate) (PVA) moulding material
3905 19 20 --- Poly (vinyl acetate) and resins
3905 19 90 --- Other
- Vinyl acetate copolymers :
3905 21 00 -- In aqueous dispersion
3905 29 00 -- Other
3905 30 00 -- Poly (vinyl alcohol), whether or not
containing unhydrolysed acetate groups
- Other :
3905 91 00 -- Copolymers
3905 99 -- Other :
3905 99 10 --- Poly (vinyl pirolidone) (p alcohol)
3905 99 90 --- Other
HSN code 3906 Acrylic polymers in primary forms
3906 10 10 Poly (methyl methacrylate):
--- Binders for pigments or inks
3906 10 90 --- Other
3906 90 - Other :
3906 90 10 --- Acrylic resins
3906 90 20 --- Polyacrylate moulding powder
3906 90 30 --- Copolymers of acrylonitrile
3906 90 90 --- Other
HSN code 3907 Polyacetals, other polyether’s and epoxide resins,
in primary forms; polycarbonates, alkyd resins,
polyallylesters and other polyesters, in primary forms
3907 10 00 - Polyacetals
3907 20 - Other polyethers:
3907 20 10 --- Poly (ether alcohols)
3907 20 90 --- Other
3907 30 - Epoxide resins :
3907 30 10 --- Epoxy resins
3907 30 90 --- Other
3907 40 00 - Polycarbonates
3907 50 00 - Alkyd resins
3907 60 - Poly (ethylene terepthalate) :
3907 60 10 --- Having an intrinsic viscosity of not less
than 0.64dl/g
3907 60 20 --- Having an intrinsic viscosity of not less than
0.64 dl/g and not greater than 0.72 dl/g
3907 60 90 --- Other (including clean, clourless grades)
3907 70 00 - Poly (Lactic Acid)
- Other polyesters :
3907 91-- Unsaturated :
3907 91 10 --- Maleic resins
3907 91 20 --- Polyester or contract resins
3907 91 30 --- Fumeric resins
3907 91 40 --- Diallylphthalate resins
3907 91 50 --- Poly (butylene terepthalate)
3907 91 90 --- Other
3907 99 -- Other :
3907 99 10 --- Diallyl phthalate resins
3907 99 20 --- Poly(butylene terepthalate)
3907 99 90 --- Other
HSN code 3908 Polyamides in primary forms
3908 10 - Polyamide -6, -11,-12, -6, 6, -6, 9, -6, 10 or
3908 10 10 -6,12:
--- Nylon moulding powder
3908 10 90 --- Other
3908 90 - Other :
3908 90 10 --- Nylon moulding powder
3908 90 20 --- Nylon in other primary forms
3908 90 90 --- Other
HSN code 3909 Amino-resins, phenolic resins and polyurethanes, in
primary forms
3909 10 - Urea resins; thiourea resins :
3909 10 10 --- Urea formaldehyde resins
3909 10 90 --- Other
3902 20 - Melamine resins :
3909 20 10 --- Melamine formaldehyde resins
3909 20 90 --- Other
3909 30 - Other amino-resins:
3909 30 10 --- Poly (phenylene oxide)
3909 30 90 --- Other
3909 40 - Phenolic resins :
3909 40 10 --- Cresol formaldehyde oxide
3909 40 20 --- Phenol formaldehyde resins
3909 40 30 --- Alkyl phenol-formaldehyde resins
3909 40 40 --- Ketonic resins
3909 40 50 --- Phenoxi resins
3909 40 60 --- Terpene phenolic resins
3909 40 90 --- Other
3909 50 00 - Polyurethanes
HSN code 3910 Silicones in primary forms
3910 00 - Silicones in primary forms
3910 00 10 --- Silicone resins
3910 00 20 --- Silicone oil
3910 00 90 --- Other
HSN code 3911 Petroleum resins, coumarone-indene resins, polyterpenes,
polysulphides, polysulphones and other products specified
in Note 3 to this chapter, not elsewhere specified or
included, in primary forms
3911 10 - Petroleum resins, coumarone-indene or
coumarone-indene resins and polyterpenes:
3911 10 10 --- Coumarone-indene resins
3911 10 90 --- Other
3911 90 - Other :
3911 90 10 --- Polysulphones
3911 90 90 --- Other
HSN code 3912 Cellulose and its chemical derivatives, not elsewhere
specified or included, in primary forms
- Cellulose acetates :
3912 11-- Non-plasticised:
3912 11 10 --- Cellulose acetate flakes
3912 11 20 --- Cellulose acetate moulding powder
3912 11 30 --- Cellulose acetobutyrate moulding powder
3912 11 40 --- Cellulose nitrate, dynamic grade
3912 11 90 --- Other
3912 12 -- Plasticised :
3912 12 10 --- Cellulose acetate flakes
3912 12 20 --- Cellulose acetate moulding powder
3912 12 30 --- Cellulose acetobutyrate moulding powder
3912 12 90 --- Other
3912 20 - Cellulose nitrates (including collodions):
-- Non-plasticised:
3912 20 11 ---- Moulding powders
3912 20 19 ---- Other
--- Plasticised :
3912 20 21 ---- Moulding powders
3912 20 29 ---- Other
- Cellulose ethers:
3912 31 00 -- Carboxymethyl cellulose and its salts
3912 39 -- Other :
--- Non-plascised:
3912 39 11 ---- Ethylcellulose
3912 39 12 ---- Methylcellulose
3912 39 19 ---- Other cellulose ethers
--- Plasticised:
3912 39 21 ---- Ethyl cellulose
3912 39 22 ---- Methyl cellulose
3912 39 29 ---- Other cellulose ether
3912 90 - Other:
3912 90 10 --- Cellulose propionate and aceto propionate,
--- non-plasticised
3912 90 20 Viscose sponge
3912 90 90 --- Other
HSN code 3913 Natural polymers (for example, alginic acid) and modified
natural polymers (for example, hardened proteins,
chemical derivatives of natural rubber), not elsewhere
specified or included, in primary forms
3913 10 - Alginic acid, its salts and esters :
3913 10 10 --- Sodium alginate
3913 10 90 --- Other
3913 90 - Other :
--- Chemical derivatives of natural rubber:
3913 90 11 ---- Chlorinated rubber
3913 90 19 ---- Other
3913 90 20 --- Hardened proteins (such as hardened casein,
gelatin)
3913 90 30 --- Dextran
3913 90 90 --- Other
HSN code 3914 Ion-exchangers based on polymers of headings 3901
to 3913, in primary forms
3914 00 - Ion–exchangers based on polymers of
headings 3901 to 3913, in primary forms:
3914 00 10 --- Ion-exchangers of the condensation,
polycondensation or polyaddition type
3914 00 20 --- Ion-exchangers of polymerisation or
co-polymerisation type
3914 00 90 --- Other
HSN code 3915 II Waste, parings and scrap;
semi-manufactures; articles waste, parings and scrap, of plastics
3915 10 00 - Of polymers of ethylene
3915 20 00 - Of polymers of styrene
3915 30 - Of polymers of vinyl chloride:
3915 30 10 --- Of copolymers of vinyl chloride
3915 30 90 --- Other
3915 90 - Of other plastics :
3915 90 10 --- Of polypropylene
--- Of polymers of vinyl acetate :
3915 90 21 ---- Of copolymers of vinyl acetate
3915 90 29 ---- Other
3915 90 30 --- Of acrylic polymers and methlyacrylic
copolymers
--- Of alkyds, polyesters and epoxide resins :
3915 90 41 ---- Of alkyds and polyesters
3915 90 42 ---- Of pet bottles
3915 90 49 ---- Of epoxide resins
3915 90 50 --- Of polyamides
--- Of amino resins; phenolic resins and
polyurethanes :
3915 90 61 ---- Of phenoplast
3915 90 62 ---- Of aminoplast
3915 90 63 ---- Of polyurethanes
--- Of cellulose and its chemical derivatives:
3915 90 71 ---- Of regenerated cellulose
3915 90 72 ---- Cellulose plastic waste such as cellulose
nitrate film scrap non-plasticised
3915 90 73 ---- Cellulose plastic waste such as cellulose
nitrate film scrap plasticised
3915 90 74 ---- Cellulose plastic waste such as cellulose
acetatc film scrap non-plasticised
3915 90 75 ---- Cellulose plastic waste such as cellulose
acetatc film scrap plasticised
3915 90 90 --- Other
HSN code 3916 Monofilament of which any cross-sectional dimension
exceeds 1 mm, rods, sticks and profile shapes, whether or
not surface-worked but not otherwise worked, of plastics
3916 10 - Of polymers of ethylene:
3916 10 10 --- Rods of polyethylene
3916 10 20 --- Canes
3916 10 90 --- Other
3916 20 - Of polymers of vinyl chloride:
--- Of poly (vinyl chloride) copolymers :
3916 20 11 ---- Canes
3916 20 19 ---- Other
--- Other:
3916 20 91 ---- Canes
3916 20 99 ---- Other
3916 90 - Of other plastics :
3916 90 10 --- Canes
--- Of phenoplast, aminoplast, alkyds and
Polyesters, polyamides, polyurethanes,
epoxide-resins (including waste and scrap),
polypropylene and acrylic, methacrylic and
acrylomethacrylic polymers :
3916 90 21 ---- Of phenoplast
3916 90 22 ---- Of aminoplast
3916 90 23 ---- Of alkyds and polysters
3916 90 24 ---- Of polyamides
3916 90 25 ---- Of polyurethanes
3916 90 26 ---- Of epoxide-resins (including waste and scrap)
3916 90 27 ---- Of polypropylene
3916 90 28 ---- Of acrylicmethacrylic and acrylomethacrylic
polymers
--- Of polymerisation and copolymerisation
products of polystyrene and polymethyl
methacrylate :
3916 90 31 ---- Of polymerisation and copolymerisation
products of polystyrene
3916 90 32 ---- Of polymethyl methacrylate
3916 90 40 --- Of regenerated cellulose
3916 90 50 --- Of cellulose nitrate and celluloid, whether
or not plasticized
3916 90 60 --- Of vulcanized fibre
3916 90 70 --- Of cellulose acetate and acetate butyrate,
whether or not plasticized
3916 90 80 --- Of vinyl plastic
3916 90 90 --- Of other polymerisation and
copolymerisation products
HSN code 3917 Tubes, pipes and hoses, and fittings therefor (for example,
joints, elbows, flanges), of plastics
- Artificial guts (sausage casings) of
hardened protein or of cellulosic materials:
3917 10 10 --- Of hardened protein
3917 10 20 --- Of cellulosic materials
- Tubes, pipes and hoses, rigid :
3917 21-- Of polymers of ethylene:
3917 21 10 --- Tubes of polyethylene
3917 21 90 --- Other
3917 22 00 -- Of polymers of propylene
3917 23 -- Of polymers of vinyl chloride :
3917 23 10 --- Seamless tubes
3917 23 90 --- Other
3917 29 -- Of other plastics :
3917 29 10 --- Seamless tubes of copolymers of vinyl
acetate and vinyl chloride
3917 29 20 --- Seamless tubes of polymers and copolymers
of polystyrene
3917 29 30 --- Tubes of cellulose nitrate and celluloid,
3917 29 40 whether or not plasticised
--- Tubes of cellulose acetate or acetate butyrate
3917 29 50 --- Tubes of vinyl plastics
3917 29 90 --- Other
3917 31 00 - Other tubes, pipes and hoses :
-- Flexible tubes, pipes and hoses, having a
minimum burst pressure of 27.6 MPa
-- Other, not reinforced or otherwise combined
with other materials, without fittings :
3917 32 10 --- Of condensation or rearrangement
polymerization products, whether or not
chemically modified
3917 32 20 --- Of addition polymerisation products
3917 32 90 --- Other
3917 33 00 -- Other, not reinforced or otherwise combined
with other materials, with fittings
3917 39 -- Other:
3917 39 10 --- Of condensation or rearrangement
polymerization products, whether or not
chemically modified
3917 39 20 --- Of addition polymerisation products
3917 39 90 --- Other
3917 40 00 - Fittings
HSN code 3918 Floor coverings of plastics, whether or not self-adhesive, in
rolls or in the form of tiles; wall or ceiling coverings of
plastics, as defined in Note 9 to this chapter
3918 10 - Of polymers of vinyl chloride :
3918 10 10 --- Wall or ceiling coverings combined with
knitted or woven fabrics, nonwovens or felts
3918 10 90 --- Other
3918 90 - Of other plastics :
3918 90 10 --- Floor coverings of linoxyne
3918 90 20 --- Wall or ceiling coverings combined with
knitted or woven fabrics, nonwovens or felts
3918 90 90 --- Other
HSN code 3919 Self-adhesive plates, sheets, film, foil, tape, strip and other
flat shapes, of plastics, whether or not in rolls
3919 10 00 - In rolls of width not exceeding 20 cm
3919 90 - Other :
3919 90 10 --- Plastic stickers, whether or not printed,
3919 90 20 embossed, or impregnated
--- Cellulose adhesive tape
3919 90 90 --- Other
HSN code 3920 Other plates, sheets, film, foil and strip, of plastics, non cellular
and not reinforced, laminated, supported or
similarly combined with other materials
3920 10 - Of polymers of ehtylene :
--- Sheets of polyethylene :
3920 10 11 ---- Rigid, plain
3920 10 12 ---- Flexible, plain
3920 10 19 ---- Other
--- Other :
3920 10 91 ---- Rigid, plain
3920 10 92 ---- Flexible, plain
3920 10 99 ---- Other
3920 20 - Of polymers of propylene :
3920 20 10 --- Rigid, plain
3920 20 20 --- Flexible, plain
3920 20 90 --- Other
3920 30 - Of polymers of styrene :
3920 30 10 --- Rigid, plain
3920 30 20 --- Flexible, plain
3920 30 90 --- Other
- Of polymers of vinyl chloride:
3920 43 00 -- Containing by weight not less than 6% of
plasticizers
3920 49 00 -- Other
- Of acrylic polymers:
3920 51 -- Of poly (methyl methacrylate):
--- Sheets :
3920 51 11 ---- Rigid, plain
3920 51 12 ---- Flexible, plain
3920 51 19 ---- Other
--- Other :
3920 51 91 ---- Rigid, plain
3920 51 92 ---- Flexible, plain
3920 51 99 ---- Other
3920 59 -- Other :
--- Polyacrylate sheets:
3920 59 11 ---- Rigid, plain
3920 59 12 ---- Flexible, plain
3920 59 19 ---- Other
--- Other :
3920 59 91 ---- Rigid, plain
3920 59 92 ---- Flexible, plain
3920 59 99 ---- Other
- Of polycarbonates, alkyd resins, polyallyl
esters or other polyesters :
3920 61 -- Of polycarbonates :
3920 61 10 --- Rigid, plain
3920 61 20 --- Flexible, plain
3920 61 90 --- Other
3920 62 -- Of poly (ethylene terephthalate):
3920 62 10 --- Rigid, plain
3920 62 20 --- Flexible, plain
3920 62 90 --- Other
3920 63 -- Of unsaturated polyesters :
3920 63 10 --- Rigid, plain
3920 63 20 --- Flexible, plain
3920 63 90 --- Other
3920 69 -- Of other polyesters :
--- Packaging film :
3920 69 11 ---- Rigid, plain
3920 69 12 ---- Flexible, plain
3920 69 19 ---- Other
--- Sun and/or dust control film :
3920 69 21 ---- Rigid, plain
3920 69 22 ---- Flexible, plain
3920 69 29 ---- Other
--- Other film :
3920 69 31 ---- Rigid, plain
3920 69 32 ---- Flexible, plain
3920 69 39 ---- Other
--- Other :
3920 69 91 ---- Rigid, plain
3920 69 92 ---- Flexible, plain
3920 69 99 ---- Other
- Of cellulose or its chemical derivatives :
3920 71-- Of regenerated cellulose:
--- Cello phane transparent:
3920 71 11 ---- Film
3920 71 19 ---- Other
--- Sheets of cellulose nitrate and celluloid,
whether or not plasticized :
3920 71 21 ---- Plain
3920 71 29 ---- Other
--- Other :
3920 71 91 ---- Rigid, plain
3920 71 92 ---- Flexible, plain
3920 71 99 ---- Other
3920 73 -- Of cellulose acetate :
--- Sheet of cellulose acetate, non-plasticized:
3920 73 11 ---- Rigid, plain
3920 73 12 ---- Flexible, plain
3920 73 19 ---- Other
--- Sheets of cellulose acetate, plasticized :
3920 73 21 ---- Rigid, plain
3920 73 22 ---- Flexible, plain
3920 73 29 ---- Other
--- Other :
3920 73 91 ---- Rigid, plain
3920 73 92 ---- Flexible, plain
3920 73 99 ---- Other
3920 79 -- Of other cellulose derivatives :
--- Sheets of cellulose nitrate and celluloid,
whether or not plasticized :
3920 79 11 ---- Rigid, plain
3920 79 12 ---- Flexible, plain
3920 79 19 ---- Other
--- Other :
3920 79 91 ---- Rigid, plain
3920 79 92 ---- Flexible, plain
3920 79 99 ---- Other
3920 91 - Of other plastics:
--- Of poly (vinyl butyral):
3920 91 11 ---- Rigid, plain
3920 91 12 ---- Flexible, plain
3920 91 19 ---- Other
3920 92 -- Of polyamides :
--- Poly (amide fluoride) film:
3920 92 11 ---- Rigid, plain
3920 92 12 ---- Flexible, plain
3920 92 19 ---- Other
--- Other :
3920 92 91 ---- Rigid, plain
3920 92 92 ---- Flexible, plain
3920 92 99 ---- Other
3920 93 -- Of amino-resins :
3920 93 10 --- Rigid, plain
3920 93 20 --- Flexible, plain
3920 93 90 --- Other
3920 94 -- Of phenolic resins :
3920 94 10 --- Rigid, plain
3920 94 20 --- Flexible, plain
3920 94 90 --- Other
3920 99 --- Of other plastics :
--- Plates, sheets, film, foil and strip of
poly(vinyl acetate) :
3920 99 11 ---- Rigid, plain
3920 99 12 ---- Flexible, plain
3920 99 19 ---- Other
--- Film, sheets, strip of vinyl plastics :
3920 99 21 ---- Rigid, plain
3920 99 22 ---- Flexible, plain
3920 99 29 ---- Other
--- Plates, sheets, strip, film or foil of
copolymers of vinyl chloride and vinyl
acetate :
3920 99 31 ---- Rigid, plain
3920 99 32 ---- Flexible, plain
3920 99 39 ---- Other
--- Sheet of poly (tetrafluoro-ethylene) (PTFE):
3920 99 41 ---- Rigid, plain
3920 99 42 ---- Flexible, plain
3920 99 49 ---- Other
--- Retro reflective sheeting :
3920 99 51 ---- Rigid, plain
3920 99 52 ---- Flexible, plain
3920 99 59 ---- Other
3920 99 60 ---- Clicking boards for leather machinery
--- Other :
3920 99 91 ---- Rigid, plain
3920 99 92 ---- Flexible, plain
3920 99 99 ---- Other
HSN code 3921 Other plates, sheets, film, foil and strip, of plastics
- Cellular :
3921 11 00 -- Of polymers of styrene
3921 12 00 -- Of polymers of vinyl chloride
3921 13 -- Of polyurethanes:
3921 13 10 --- Flexible
3921 13 90 --- Other
3921 14 00 -- Of regenerated cellulose
3921 19 00 -- Of other plastics
3921 90 - Other :
3921 90 10 --- Thermocol
--- Of polymers of vinyl chloride :
3921 90 21 ---- Rigid, lacquered
3921 90 22 ---- Flexible, lacquered
3921 90 23 ---- Rigid, metallised
3921 90 24 ---- Flexible, metallised
3921 90 25 ---- Rigid, laminated
3921 90 26 ---- Flexible, laminated
3921 90 29 ---- Other
--- Of regenerated cellulose :
3921 90 31 ---- Rigid, lacquered
3921 90 32 ---- Flexible, lacquered
3921 90 33 ---- Rigid, metallised
3921 90 34 ---- Flexible, metallised
3921 90 35 ---- Rigid, laminated
3921 90 36 ---- Flexible, laminated
3921 90 39 ---- Other
--- Other :
3921 90 91 ---- Rigid, lacquered
3921 90 92 ---- Flexible, lacquered
3921 90 93 ---- Rigid, metallised
3921 90 94 ---- Flexible, metallised
3921 90 95 ---- Rigid, laminated
3921 90 96 ---- Flexible, laminated
3921 90 99 ---- Other
HSN code 3922 Baths, shower-baths, sinks, wash-basins, bidets, lavatory
pans, seats and covers, flushing cisterns and similar
sanitary ware, of plastics
3922 10 00 - Baths, shower-baths, sinks and wash basins
3922 20 00 - Lavatory seats and covers
3922 90 00 - Other
HSN code 3923 Articles for the conveyance or packing of goods, of plastics;
stoppers, lids, caps and other closures, of plastics
HSN code 3923 10 Boxes, cases, crates and similar articles
3923 10 10 --- Plastic containers for audio or video
cassettes, cassette tapes, floppy disk and
similar articles
3923 10 20 --- Watch-box, jewellery box and similar
3923 10 30 containers of plastics
--- Insulated ware
3923 10 40 --- Packing for accommodating connectors
3923 10 90 --- Other
HSN code 3923 21 00 Sacks and bags (including cones)
-- Of polymers of ethylene
3923 29 -- Of other plastics:
3923 29 10 --- Of poly (vinyl chloride)
3923 29 90 --- Other
HSN code 3923 30 Carboys, bottles, flasks and similar articles
3923 30 10 --- Insulated ware
3923 30 90 --- Other
HSN code 3923 40 00 Spools, cops, bobbins and similar supports
HSN code 3923 50 Stoppers, lids, caps and other closures
3923 50 10 --- Caps and closures for bottles
3923 50 90 --- Other
HSN code 3923 90 Other
3923 90 10 --- Insulated ware
3923 90 20 --- Aseptic bags
3923 90 90 --- Other
HSN code 3924 Tableware, kitchenware, other household articles and hygienic
or toilet articles, of plastics
HSN code 3924 10 Tableware and kitchenware
3924 10 10 --- Insulated ware
3924 10 90 --- Other
HSN code 3924 90 Other
3924 90 10 --- Toilet articles
3924 90 20 --- Insulated ware
3924 90 90 --- Other
HSN code 3925 Builders' ware of plastics, not elsewhere specified or
included
HSN code 3925 10 00 Reservoirs, tanks, vats and similar containers, of a capacity
exceeding 300 litres
HSN code 3925 20 00 Doors, windows and their frames and thresholds for doors
HSN code 3925 30 00 Shutters, blinds (including Venetian blinds) and similar articles
and parts thereof
HSN code 3925 90 Other
3925 90 10 --- Of polyurethane
3925 90 90 --- Other
HSN code 3926 Other articles of plastics and articles of other materials of
heading Nos 3901 to 3914
HSN code 3926 10 Office or school supplies
office supplies of a kind classified as stationery
other than pins, clips, and writing instruments
3926 10 11 ---- Of polyurethane foam
3926 10 19 ---- Other
--- Other :
3926 10 91 ---- Of polyurethane foam
3926 10 99 ---- Other
HSN code 3926 20 Articles of apparel and clothing accessories (including gloves,
mittens and mitts)
--- Gloves :
3926 20 11 ---- Disposable
3926 20 19 ---- Non-disposable
--- Aprons :
3926 20 21 ---- Of polyurethane foam
3926 20 29 ---- Other
--- Plastic stickers for garments :
3926 20 31 ---- Of polyurethane foam
3926 20 39 ---- Other
--- Collar stays, patties, butterfly, shoulder-pads
and other stays :
3926 20 41 ---- Of polyurethane foam
3926 20 49 ---- Other
--- Other :
3926 20 91 ---- Of polyurethane foam
3926 20 99 ---- Other
HSN code 3926 30 Fittings for furniture, coach work or the like
3926 30 10 --- Of polyurethane foam
3926 30 90 --- Other
3926 40 Statuettes and other ornamental articles
Bangles
3926 40 11 ---- Of polyurethane foam
3926 40 19 ---- Other
Beads
3926 40 21 ---- Of polyurethane foam
3926 40 29 ---- Other
Statuettes
3926 40 31 ---- Of polyurethane foam
3926 40 39 ---- Other
HSN code 3926 40 40 Table and other household articles (including hotel and
restaurant) for decoration
3926 40 41 ---- Of polyurethane foam
3926 40 49 ---- Other
Decorative sheets
3926 40 51 ---- Of polyurethane foam
3926 40 59 ---- Other
HSN code 3926 40 60 Sequine
Other
3926 40 91 ---- Of polyurethane foam
3926 40 99 ---- Other
HSN code 3926 90 Other
3926 90 10 --- PVC belt conveyor
--- Couplers, packing rings, O rings and the like:
3926 90 21 ---- Of polyurethane foam
3926 90 29 ---- Other
--- Lasts, with or without steel hinges ; EVA
and grape sheets for soles and heels; welts:
3926 90 31 ---- Of polyurethane foam
3926 90 39 ---- Other
--- Rings, buckles, tacks, washers and other
decorative fittings made of plastic used as
trimmings and embellishments for leather
products; patterns for leather foot wear,
leather garments and leather goods :
3926 90 41 ---- Of polyurethane foam
3926 90 49 ---- Other
--- Retroreflective sheeting of other than of
heading 3920 :
3926 90 51 ---- Of polyurethane foam
3926 90 59 ---- Other
--- Hangers :
3926 90 61 ---- Of polyurethane foam
3926 90 69 ---- Other
--- Plastic or nylon tipped hammers; insulating liner
of nylon , HDPE :
3926 90 71 ---- Of polyurethane foam
3926 90 79 ---- Other
3926 90 80 --- Polypropylene articles, not elsewhere
specified or included
--- Other:
3926 90 91 ---- Of polyurethane foam
3926 90 99 ---- Other
Click here to know GST rate on Goods and Services
GST Exemption list of goods and services
Find HSN number or Service tariff code for GST
GST registration guidelines
Indian GST Laws
How to export your goods?
Useful Information about GST:
When to file Annual Return of GST online?
Procedures to claim reduction in output tax liability of GST in India
Process to issue GST Provisional ID to existing VAT payers in India
Procedures to claim Input Tax Credit under GST in India
When to file first Return of GST tax in India?
GST Tax returns filing – Who, How and When?
Step by step procedures to create username and password in GST common portal
How is time of supply accounted under GST Tax Calculation
Valuation of GST under special cases
Valuation of GST Taxable supply
Step by step procedures to issue GST provisional ID in India
When to pay GST for supply of services?
When to pay GST?
GST on short supplied goods and services by nature
Step by step procedures about e-signing under GST system in India
Goods and services exempted to pay GST
Who has to pay GST?
GST Composition Levy
Various status of provisional ID under GST in India
Useful Information about Export and Import:
What happens if your buyer rejects cargo? What are the major problems if consignee not taken delivery of cargo?
How to get export order from foreign buyers?
How to get RCMC from Export Promotion Councils
How to hide invoice value of original contract under high sea sale transactions
How to know the quality, quantity or contents of goods before import customs clearance
How to know volume of LCL cargo if not measured at factory
Transferability of Bill of Lading
Transhipment - A redefinition
Travelers to India under import duty exemption, Frequently Asked Questions Part 2
Triangular export
Types of Insurance Documents.
How does Letter of Credit work?
What are the risks and solutions in Export Business?
Service Tax - Click here to read complete notification under Budget 2014
What is Bank post shipment credit to exporters?
Types of export containers
Measurement of export containers
Export Import Policy of India 2015-20
MEIS, Merchandise Exports from India Scheme
SEIS, Service Exports from India Scheme
Merge your Commercial Invoice and Packing List for all your future exports
Export procedures and documentation
What is post shipment credit to exporters?
Bank financial benefits to Exporters
How does Letter of Credit work?
Baggage clearance after GST implementation
Refund of SAD paid on imports
How to claim ITC under imports?
Procedures to claim Drawback after GST implantation
How to claim IGST refund on exports?
Export procedure changes after GST implementation
How to make DA mode of payment safe
How to make delay in delivery of Shipment?
How to minimize import cargo clearance time? An open logic proposal to WTO
How to obtain a duplicate BL, if original bill of lading lost.
How to obtain GSP - Certificate of Origin?
How to obtain Phytol sanitary certificate. What is phytosanitary certification
How to obtain waiver on detention/ demurrage on imported goods/container from Shipping company/CFS