20’ open top container
In this post about 20’ open top container is explained which includes inner measurement and outer measurement of 20’ open top container, volume capacity of Twenty foot Equipment Unit, tare weight and loading capacity of 20’ open top shipping container.
20’ container means Twenty feet Equipment Unit (TEU)
The different types of shipping cargo containers are Dry containers, Open Top Containers, Flat Rack containers, Flat Rack Container with Four Freestanding Posts, Platform containers, High Cube containers, Steel Refrigerated Container, Aluminum Refrigerated Container, Fuel Tank Container, Power Pack Generator Container, Flat Rack Container with Collapsible End, Flat Rack Hi-Cube Container, Hi-Cube Open Top Container, Hi-Cube Hanger Container, Mafi Trailers etc.
20’ Open Top Container
The walls of open-top containers are generally made of corrugated steel. The floor is made of wood. It has the following typical distinguishing structural features. The roof consists of removable bows and a removable tarpaulin. The door header may be swiveled out. These two structural features greatly simplify the process of packing and unpacking the container. In particular, it is very easy to pack and unpack the container from above or through the doors by crane or crab when the roof is open and the door header is swiveled out. It should be noted, however, that the purpose of the roof bows of an open-top container is not solely to support the tarpaulin but also to contribute to container stability. Flat racks are therefore more suitable for over height cargoes. Lashing rings, to which the cargo may be secured, are installed in the upper and lower side rails and the corner posts. The lashing rings may take loads of up to 1,000 kg.
What is the dimension of 20’ open top containers?
The dimension of 20 feet open top container (20’open top container) can be explained as inner dimension and outer dimension.
What is the inner dimensions of 20’ open top cargo container (Interior dimension of 20’ open top container) ?
The inner dimension of 20’ open top container is as follows. (The length, width and height of 20’ open top container in milli meter, meter and feet)
Length = 5900mm (5.90meter or 19’04” or 19 feet 04 inches)
Width = 2352mm (2.35 meter or 7’ 08” or 7 feet 08 inches)
Height = 2370mm (2.37 meter or 7’9.3” or 7 feet 9.3 inches)
What is the outer dimension of 20’ open top container (exterior dimension of 20’open top container) ?
The outer dimension of 20’open top cargo container (exterior dimension of 20’ open top container) is as follows:
Length = 6060mm (6.06 meter or 19’10.5’’ or 19 feet 10.5 inches)
Width = 2440mm (2.44 meter or 8’ or 8 feet)
Height = 2590mm (2.59 meter or 8’6” or 8 feet 6 inches)
What is the door width and door height of a 20’ open top container in mm, meter and foot?
The door width of 20’ cargo container is 2340mm (2.340 meter or 7’8.3” or 7 feet 8.3 inches) and door height 2280mm (2.280 meter or 7’5.4” or 7 feet 5.4 inches).
The cubic volume of a 20 foot open top container?
The cubic volume of a 20’ open top cargo container is 32.8 cubic meter (1,158cu.ft)
What is the Door opening measurement of 20’ open top container?
Door opening width of a 20’ open top container is 2340mm (2.340 meter or 7’8.3” or 7 feet 8.3 inches) and door opening height of 20 feet open top container is 2280mm (2.28 meter or 7’5.4” or 7 feet 5.4inches)
Tare Weight of 20 feet open top container?
Tare weight of a 20 foot open top container is 2350 kgs (5,180lbs)
Maximum Pay Load weight of 20’ open top container?
Maximum pay load weight of 20’ open top container is 28130 kgs
What is the maximum capacity of 20’ open top container?
Maximum capacity of 20’ open top container is 28130 kgs
The information on measurement and weight mentioned may vary slightly from one brand owner to another. Some of the top cargo container owners are NYK, Evergreen, CMA-CGM, Maersk, MSC, Hapag Lloyd, APL, Cosco, Hanjin, CSCL. You may reconfirm exact weight, measurement and other details from container owner or their agent.
GST rate payable for goods or service, click here
Click here to know GST exemption list of goods and service
Also read Dimension details of Normal Dry Container 20’ , Measurements of normal dry cargo container 40’ , Dimension of High cube Containers 40’ , Open Top Containers 40’ Dimension , Refrigerated Container 40’ measurements , Dimension specification of Aluminum , Refrigerated container 20 feet, Dimension of High cube aluminum refrigerated container 40’, Measurements of Insulated Container Parthole type 20’ , Dimension of Insulated Container Porthole type 40’ ,Length,width,height of Hard Top Container 20’ , Dimension of Hard Top Container 40 foot Platform Container 20’ Dimension details , Platform containers 40’ Measurement details ,Dimension of Ventilated Container 20’ , Dimension details of Flat rack Container 20’ , Dimension specification of Flat rack Container 40’
In this post I explained about 20’ open top container which includes volume capacity of Twenty foot Equipment Unit, tare weight and loading capacity of 20’open top shipping container, inner measurement and outer measurement of 20’ open top container.
Have you satisfied with this information about 20’ open top container? Share below your experience and knowledge about 20’open top cargo container.
Also read;
How to export your product?
How to import your product?
Click here to know HS code of your product
What is the ITC code (Indian Tariff Code) of your product?
12 Major risks and solutions in Imports and Exports
Different types of export containers
Related study about international trade:
What are the risks and solutions in Export Business?
How to overcome negative thinking in Exports Business?
How to send samples?
How to prepare Export Invoice?
How to get certificate of origin?
How does letter of credit work?
What are the terms of Payment in Export Import Trade?
Terms of Delivery in International Business
How to settle dispute in Exports and Imports?
Central Excise Procedures under Exports in India
How to get RCMC?
What are the legal documents in Exports?
Why does Documentation require in Exports and Imports?