HSN code for Copper and Copper articles

Posted on 10 June 2022 Category : HSN Codes for GST

HSN code CHAPTER-74

Copper and articles thereof

The information provided below about HSN codes are used for GST purpose to classify goods. You may reconfirm with GST authorities whether your product HSN code is classified correctly below. The HSN codes under 02 digits, 04 digits, 06 digits and 08 digits explains and classifies broadly for each section of goods.

Notes:

In this Chapter, the following expressions have the meanings hereby assigned to them:

(a) Refined copper

Metal containing at least 99.85 per cent, by weight of copper; or Metal containing at least 97.5 per cent, by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following Table:

TABLE - OTHER ELEMENTS

Element Limiting content % by weight

Ag Silver 0.25

As Arsenic 0.5

Cd Cadmium 1.3

G Chromium 1.4

Mg Magnesium 0.8

Pb Lead 1.5

S Sulphur 0.7

Sn Tin 0.8

Te Tellurium 0.8

Zn Zinc 1.0

Zr Zirconium 0.3

Other elements *, each 0.3

* Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si.

(b) Copper alloys

Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:

(i) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or

(ii) the total content by weight of such other elements exceeds 2.5 per cent.

(c) Master alloys

Alloys containing with other elements more than 10 per cent, by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphuring agents or for similar uses in the metallurgy of nonferrous metals. However, copper phosphide (phosphor copper) containing more than 15 per cent, by weight of phosphorous falls in heading 2848 00 00.

(d) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the

width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by

simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings. Wire-bars and billets with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 7403 00 00.

(e) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

(f) Wire

Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two side being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.

(g) Plates, sheets, strip and foil

Flat-surfaced products (other than the unwrought products of heading 7403 00 00), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two

sides being straight, of equal length and parallel) of a uniform thickness, which are:

(i) of a rectangular (including square) shape with a thickness not exceeding one-tenth of the width,

(ii) of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Headings 7409 00 00 and 7410 00 00 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

(h) Tubes and Pipes

Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be taken to be tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waited, expanded, cone-shaped or fitted with flanges, collars or rings.

HSN Code Description of goods

HSN code 7401 Copper mattes; cement copper (precipitated copper)

7401 00    - Copper mattes; Cement copper (precipitated
    copper):
7401 00 10    ---    Copper mattes
7401 00 90    ---    Cement copper (precipitated copper)

HSN code 7402 Unrefined copper; copper anodes for electrolytic refining

7402 00    -    Unrefined copper; copper anodes for electrolytic
        refining :
7402 00 10    ---    Blister copper
7402 00 90    ---    Other

HSN code 7403 Refined copper and copper alloys, unwrought

    -    Refined copper :
7403 11 00    --    Cathodes and sections of cathodes
7403 12 00    --    Wire-bars
7403 13 00    --    Billets
7403 19 00    --    Other
    -    Copper alloys :
7403 21 00    --    Copper-zinc base alloys (brass)
7403 22    --    Copper-tin base alloys (bronze) :
7403 22 10    ---    Phosphor bronze
7403 22 90    ---    Other
7403 29 00    --    Other copper alloys (other than master alloys
        of heading 7405)

HSN code 7404 Copper waste and scrap

7404 00    -    Copper waste and scrap:
    ---    Of copper :
7404 00 11    ----    Empty or discharged cartridges of all bores and sizes
7404 00 12    ----    Copper scrap, namely the following :
copper wire scrap covered by ISRI code words

Barley, Berry and Birch; heavy copper scrap

covered by ISRI code word Candy;unalloyed

copper scrap covered by ISRI code word Cliff;

copper wire nodules scrap covered by ISRI code

words Clove, Cobra and Cocoa; light copper

scrap covered by ISRI Code word Dream;

muntz metal tubes covered by ISRI code word

'Palms'; Miscellaneous copper-containing skimming,

grindings, ashes, irony brass and copper, residues

and slags covered by ISRI code word 'Drove'

Copper wire scrap with various types of insulation

covered by ISRI code word 'Druid'
7404 00 19    ----    Other
    ---    Of copper alloys :
7404 00 21    ----    Empty or discharged cartridges of all bores
    ----    and sizes
7404 00 22        Brass scrap, namely the following :
refinery brass scrap covered by ISRI code word

Drink; composition of red brass scrap covered by

ISRI code word Ebony; red brass composition

turnings scrap covered by ISRI code word Enerv;

genuine babbit-lined brass bushings scrap covered

by ISRI code word Elder; machinery or hard brass

solids scrap covered by ISRI code word Engel;

machinery or hand brass solids scrap covered by

ISRI code word Erin; cocks and faucets scrap

covered by ISRI code word Grape; yellow brass

scrap covered by ISRI code word Honey; yellow

brass castings covered by ISRI code word Ivory;

new brass clippings covered by ISRI code word

Label; yellow brass primer covered by ISRI code

word Lark; brass pipe covered by ISRI code word

Melon; yellow brass rod turnings covered by ISRI

code word Night;new yellow brass rod ends

covered by ISRI code word Noble; yellow brass

turnings covered by ISRI code word Nomad;

mixed unsweated auto radiators covered by ISRI

code word Ocean; admiralty brass condenser

tubes covered by ISRI code word Pales;

aluminium brass condenser tubes covered by ISRI

code word Pallu; manganese bronze solids

covered ISRI code word 'Parch'';

High Grade - Low Lead Bronze/Brass Solids

covered by ISRI cover word Éland'';

High lead bronze solids and borings covered by ISRI

code word 'Élias'';

Clean fired 70/30 brass shell cases free of primers

and any other foreign material covered by ISRI

code word 'Lace'';

Clean fired 70/30 brass shell cases containing the

brass primers and containing no other foreign

material covered by ISRI code word 'Lady'';

Clean fired 70/30 brass shells free of bullets, iron

and any other foreign material covered by ISRI

word ''Lake'; Clean muffled (popped)70/30 brass

shells free of bullets, iron and any other foreign

material covered by ISRI code word 'Lamb'
7404 00 23    ---- Nickel silver scrap namely the following:
    mixed new nickel silver clippings covered by ISRI
    code word ‘Maize’; new nickel silver clippings
    covered by ISRI code word ‘Major’; new segregated

    nickel silver clippings covered by ISRI code
    word ‘Malar’; old nickel silver clippings covered
    by ISRI code word ‘Malic’; nickel silver castings
    covered by ISRI code word ‘Naggy’; nickel silver
    turnings covered by ISRI code word ‘Niece’
7404 00 29    ---- Other

HSN code 7405 00 00 Master alloys of copper

HSN code 7406 Copper powders and flakes

7406 10 00 - Powders of non-lamellar structure
7406 20 00 - Powders of lamellar structure; flakes

HSN code 7407 Copper bars, rods and profiles

7407 10    -    Of refined copper :
7407 10 10    ---    Electrolytic copper rods or black copper rods
7407 10 20    ---    Other copper rods
7407 10 30    ---    Copper bars (excluding hollow bars)
7407 10 40    ---    Hollow bars of copper
    ---    Profiles :
7407 10 51    ----    Hollow profiles
7407 10 59    ----    Other
7407 10 90    ---    Other
    -    Of copper alloys :
7407 21    --    Of copper-zinc base alloys (brass) :
7407 21 10    ---    Bars
7407 21 20    ---    Rods
7407 21 30    ---    Hollow bars
7407 21 90    ---    Other
7407 29    --    Other :
7407 29 10    ---    Rods of bronze and similar alloys
    ---    Profiles :
7407 29 21    ----    Hollow
7407 29 29    ----    Other
7407 29 90    ---    Other

HSN code 7408 Copper wire

    -    Of refined copper :
7408 11    --    Of which the maximum cross-sectional dimension
        exceeds 6 mm :
7408 11 10    ---    Copper weld wire
7408 11 90    ---    Other
7408 19    --    Other :
7408 19 10    ---    Copper weld wire
7408 19 20    ---    Welding wire
7408 19 90    ---    Other
    -    Of copper alloys :
7408 21    --    Of copper-zinc base alloys (brass) :
7408 21 10    ---    Of which the maximum cross-sectional
        dimension exceeds 6 mm
7408 21 90    ---    Other
7408 22    --    Of copper-nickel base alloys (cupro-nickel) or
        copper-nickel-zinc base alloys (nickel silver) :
7408 22 10    ---    Silver plated flattened wire of copper (lametta)
7408 22 20    ---    Other of which the maximum cross-sectional
        dimension exceeds 6 mm
7408 22 90    ---    Other
7408 29    --    Other :
7408 29 10    ---    Wire of bronze and similar alloys
7408 29 90    ---    Other

HSN code 7409 Copper plates, sheets and strip, of a thickness exceeding

0.12.5 mm

    -    Of refined copper :
7409 11 00    --    In coils
7409 19 00    --    Other
    -    Of copper-zinc base alloys (brass) :
7409 21 00    --    In coils
7409 29 00    --    Other
    -    Of copper-tin base alloys (bronze) :
7409 31 00    --    In coils
7409 39 00    --    Other
7409 40 00    -    Of copper-nickel base alloys (cupro-nickel) or
        copper-nickel-zinc base alloys (nickel silver)
7409 90 00    -    Of other copper alloys

HSN code 7410 Copper foil (whether or not printed or backed with paper,

paperboard, plastics or similar backing materials) of a

thickness (excluding any backing) not exceeding 0.12.5 mm

    -    Not backed :
7410 11 00    --    Of refined copper
7410 12 00    --    Of copper alloys
    -    Backed :
7410 21 00    --    Of refined copper
7410 22 00    --    Of copper alloys

HSN code 7411 Copper tubes and pipes

7411 10 00    -    Of refined copper
    -    Of copper alloys :
7411 21 00    --    Of copper-zinc base alloys (brass)
7411 22 00    --    Of copper-nickel base alloys (cupro-nickel) or
        copper-nickel-zinc base alloys (nickel silver)
7411 29 00    --    Other

HSN code 7412 Copper tube or pipe fittings (for example, couplings,

elbows, sleeves)

7412 10 00    -    Of refined copper
7412 20    -    Of copper alloys :
    ---    Brass :
7412 20 11    ----    Tube-well strainer
7412 20 12    ----    Hose connectors
7412 20 19    ----    Other
7412 20 90    ---    Fittings of bronze or other alloys of copper

HSN code 7413 00 00 Stranded wire, cables, plated bands and the like, of copper,

not electrically insulated

HSN code 7415 Nails, tacks, drawing pins, staples (other than those of

heading 8305 ) and similar articles, of copper or of

iron or steel with heads of copper; screws, bolts, nuts,

screw hooks, rivets, cotters, cotter-pins, washers (including

spring washers) and similar articles, of copper

7415 10 00    -    Nails and tacks, drawing pins, staples and
        similar articles
    -    Other articles, not threaded :
7415 21 00    --    Washers (including spring washers)
7415 29 00    --    Other
    -    Other threaded articles :
7415 33    --    Screws; bolts and nuts :
7415 33 10    ---    Screws for wood
7415 33 90    ---    Other
7415 39    --    Other :
7415 39 10    ---    Rivets (excluding tubular or bifurcated)
7415 39 90    ---    Other

HSN code 7418 Table, kitchen or other household articles and parts

thereof, of copper; pot scorers and scouring or polishing

pads, gloves and the like, of copper; sanitary ware and

parts thereof, of copper

7418 10 Table, kitchen or other household articles and parts thereof;

pot scouters and scouring or polishing pads, gloves and the

like:

HSN code 7418 10 10 Pot scorers and scouring or polishing pads, gloves and the

like

- - -    Utensils:
7418 10 21    - - - -    Of Brass
7418 10 22    - - - -    Of Copper
7418 10 23    - - - -    Of other copper alloys
7418 10 24    - - - -    E.P.N.S. Ware
    - - -    Other:
7418 10 31    - - - -    Of E.P.N.S
7418 10 39    - - --    Other
7418 10 90    - - -    Parts

HSN code 7418 20 Sanitary ware and parts thereof

7418 20 10 --- Sanitary ware
7418 20 20 --- Parts of sanitary ware

HSN code 7419 00 00 Other articles of copper

HSN code 7419 10 Chain and parts thereof

7419 10 10    ---    Chain
    ---    Parts :
7419 10 21    ----    Of copper chains
7419 10 29    ----    Other

Other:

HSN code 7419 91 00 Cast, moulded, stamped or forged, but not further worked

7419 99 Other:

HSN code 7419 99 10 Reservoirs, tanks, vats and similar containers of a capacity

above 300 litres

HSN code 7419 99 20 Articles of copper alloys electroplated with nickel-silver

HSN code 7419 99 30 Articles of brass