HSN code CHAPTER-75
Nickel and articles thereof
The information provided below about HSN codes are used for GST purpose to classify goods. You may reconfirm with GST authorities whether your product HSN code is classified correctly below. The HSN codes under 02 digits, 04 digits, 06 digits and 08 digits explains and classifies broadly for each section of goods.
Note:
In this Chapter, the following expressions have the meanings hereby assigned to them:
(a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products, which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
(b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
(c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along them whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.
(d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products of heading 7502 00 00), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
i. of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;
ii. of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings. Heading 7506 00 00 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
(e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular, or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waited, expanded, cone-shaped or fitted with flanges, collars or rings.
HSN Code Description of goods
HSN code 7501 Nickel mattes, nickel oxide sinters and other intermediate
products of nickel metallurgy
7501 10 00 - Nickel mattes
7501 20 00 - Nickel oxide sinters and other intermediate
products of nickel metallurgy
HSN code 7502 Unwrought nickel
7502 10 00 - Nickel, not alloyed
7502 20 - Nickel alloys :
7502 20 10 --- Cupro-nickel containing more than 40%
by weight of nickel
7502 20 20 --- Monel metal including ‘K’ monel
7502 20 30 --- Nickel alloys containing more than 40% by
weight of nickel
7502 20 40 --- Nickel alloys containing more than 10 % but not
more than 40 % by weight of nickel
7502 20 90 --- Other
HSN code 7503 Nickel waste and scrap
7503 00 - Nickel waste and scrap :
7503 00 10 --- Nickel scrap, namely the following :
New nickel scrap covered by ISRI code word
‘Aroma’; old nickel scrap covered by ISRI code
word ‘Burly’; new cupro nickel clips and solids
covered by ISRI code word ‘Dandy’; cupro nickel
solids covered by ISRI code word’Daunt’;
soldered cupro-nickel solids covered by ISRI
code word ‘Delta’; cupro nickel spinnings,
turnings, borings covered by ISRI code word
‘Decoy’; miscellaneous nickel copper and nickel
copper iron covered by ISRI code word ‘Depth’;
new R-monel clippings solids covered by ISRI
code word ‘Hitch’; new mixed monel solids and
clippings covered by ISRI code word ‘House’; old
monel sheet and solids covered by ISRI code
word ‘Ideal’; k-monel solids covered by ISRI
code word ‘Indian’; soldered monel sheet and
solids covered by ISRI code word ‘Junto’; monel
castings covered by ISRI code ‘ Lemon’; monel
turnings covered by ISRI code word ‘Lemur’;
nickel scrap obtained by breaking up of ships,
boats and other floating structures;
Nickel-Iron batteries to be sold free of crates,
copper terminal connectors and excess liquid,
must be free of nickel cadmium batteries covered
by ISRI code word 'Vaunt'.
7503 00 90 --- Other
HSN code 7504 00 00 Nickel powders and flakes
HSN code 7505 Nickel bars, rods, profiles and wire
- Bars, rods and profiles :
7505 11 -- Of nickel, not alloyed :
7505 11 10 --- Hollow bars
7505 11 20 --- Other bars; rods and profiles
7505 12 -- Of nickel alloys :
7505 12 10 --- Hollow bars
7505 12 20 --- Other bars; rods and profiles
- Wire :
7505 21 00 -- Of nickel, not alloyed
7505 22 00 -- Of nickel alloys
HSN code 7506 Nickel plates, sheets, strip and foil
7506 10 00 - Of nickel, not alloyed
7506 20 00 - Of nickel alloys
HSN code 7507 Nickel tubes, pipes and tube or pipe fittings (for example,
couplings, elbows, sleeves)
- Tubes and pipes :
7507 11 00 -- Of nickel, not alloyed
7507 12 00 -- Of nickel alloys
7507 20 00 - Tube or pipe fittings
HSN code 7508 Other articles of nickel
7508 10 00 - Cloth, grill and netting, of nickel wire
7508 90 - Other :
7508 90 10 --- Electroplating anodes of nickel
7508 90 20 --- Blanks ordinarily used for manufacturing
tubes and pipes of nickel
7508 90 30 --- Nickel screen
7508 90 90 --- Other articles of nickel and nickel alloy
Click here to know GST rate on Goods and Services
GST Exemption list of goods and services
Find HSN number or Service tariff code for GST
GST registration guidelines
Indian GST Laws
How to export your goods?
Useful Information about GST:
Refund of Input Tax Credit (ITC) of GST, FAQ
Migration procedures for existing VAT payers to GST online in India
Refund of GST paid in India, FAQ
4 Conditions when applying for refund of Input Tax Credit (ITC) under GST
Enrolling an existing VAT taxpayers at the GST Common Portal
Difference between types of goods and services and types of GST
4 types of Goods and Services in India for GST rate
Difference between IGST on International goods and IGST on domestic goods.
Navigation controls to enrol with GST in India for existing VAT payers in India How is IGST calculated under Imports?
How is IGST rate on imports treated?
How to register a Digital Signature Certificate under GST in India. GST and e-Commerce Business, FAQ
Definition of E-Commerce under GST
How to identify the steps in enrolment process of a tax payer at the GST common portal.
TDS under GST, Frequently Asked Questions
Does Interest attract on GST Tax payment delay?
Step by step procedure to login with GST common portal in India
Mechanism of Payment of GST tax in India
Levy of late fee for GST Tax returns filing in India
I pay Service Tax on my services. But I am not sure how do I pay the new GST?
Notice to GST return filing defaulters
Useful Information about Export and Import:
How does a Running bond work?
How does Bill of Lading work in DP payment terms?
How does Bill of Lading work in Sight LC
Transferability of Bill of Lading
Transhipment - A redefinition
Triangular shipment
Types of Insurance Documents
How does CENVAT Credit work?
Import General Manifest (IGM)
Importance of Bill of Lading
Is Airway bill a documents of title?
Is Customs House Agents (CHA ) required to be appointed mandatory?
Is DP terms of payment safe in export business?
Is Letter of Credit LC safe for an Importer?
Is ON BOARD CERTIFICATE required for LC negotiation
What is VACIS exam in US import customs clearance
When can an exporter release bill of lading from shipping company?
When does exporter get EP copy of shipping bill after customs clearance
How does CFR term of delivery work in Export Import business