HSN codes for Tin and Tin articles

Posted on 10 June 2022 Category : HSN Codes for GST

HSN code CHAPTER-80

Tin and articles thereof

The information provided below about HSN codes are used for GST purpose to classify goods. You may reconfirm with GST authorities whether your product HSN code is classified correctly below. The HSN codes under 02 digits, 04 digits, 06 digits and 08 digits explains and classifies broadly for each section of goods.

Note:

In this Chapter, the following expressions have the meanings hereby assigned to them:

(a) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

(b) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along them whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width

(d) Plates, sheets, strip and foil

Flat-surfaced products (other than the unwrought products of heading 8001 00 00), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

i. of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;

ii. of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

(e) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waited, expanded, cone-shaped or fitted with flanges, collars or rings.

HSN Code Description of goods

HSN code 8001 Unwrought tin

8001 10    -    Tin, not alloyed :
8001 10 10    ---    Blocks
8001 10 90    --- Ingots, pigs, slabs and other primary forms of tin
8001 20 00    -    Tin alloys

HSN code 8002 Tin waste and scrap

8002 00    -    Tin waste and scrap :
8002 00 10    ---    Tin scrap, namely the following :
        block tin covered by ISRI code word ‘Ranch’;
        high tin base babbit covered by ISRI code word
        ‘Raves’;
        pewter covered by ISRI code word ‘Ranks’
8002 00 90    ---    Other

HSN code 8003 Tin bars, rods, profiles and wire

8003 00    -    Tin bars, rods, profiles and wire :
8003 00 10    ---    Hollow bars
8003 00 20    ---    Bars, other than hollow bars; rods
8003 00 30    ---    Profiles
8003 00 40    ---    Wire

HSN code 8007 Other articles of tin

8007 00    -    Other articles of tin :
8007 00 10    ---    Blanks
8007 00 90    ---    Other

Click here to know GST rate on Goods and Services

GST Exemption list of goods and services

Find HSN number or Service tariff code for GST

GST registration guidelines

Indian GST Laws

How to export your goods?

Useful Information about GST:

I pay Service Tax on my services. But I am not sure how do I pay the new GST?
Notice to GST return filing defaulters

When to file Annual Return of GST online?

Procedures to claim reduction in output tax liability of GST in India

Process to issue GST Provisional ID to existing VAT payers in India
Procedures to claim Input Tax Credit under GST in India