CUSTOMS Notification No 57 of 2017 dt 30th June, 2017

 

 

Notification no 57/2017 Customs date on 30th June, 2017

 

 

The extract of CUSTOMS Notification No. 57/2017- CUSTOMS is given below:

 

Notification No. 57/2017-CUSTOMS

 

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]

 

GOVERNMENT OF INDIA

MINISTRY OF FINANCE

(DEPARTMENT OF REVENUE)

 

 

Notification No. 57/2017 – Customs

 

New Delhi, the 30th June, 2017

G.S.R.

(E). – In exercise of the powers conferred by sub-section (1) of section 25

 

of the Customs Act, 1962 (52 of 1962), the Central Government, on being satisfied that it is necessary in the public interest so to do, hereby exempts the goods of the description as specified in column (3) of the Table below, as the case may be, and falling within the Chapter, heading, sub-heading or tariff item of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) as are specified in the corresponding entry in column (2) of the said Table, when imported into India, from so much of the duty of customs leviable thereon under the said First Schedule as is in excess of the amount calculated at the standard rate as specified in the corresponding entry in column (4) of the said Table subject to any of the conditions,

 

as  specified  in  the  Annexure  to  this  notification,  the  condition

number

of  which  is

mentioned in the corresponding entry in column (5) of the said Table.

 

 

 

 

 

 

 

TABLE

 

 

 

 

 

 

 

 

 

 

 

 

S.No.

Chapter or

 

Description of goods

Standard

Condition

 

 

 

Heading or

 

 

rate

No.

 

 

 

Sub-heading

 

 

 

 

 

 

 

or tariff

 

 

 

 

 

 

 

item

 

 

 

 

 

 

(1)

(2)

 

(3)

(4)

(5)

 

 

 

 

 

 

 

 

 

1.

4016 99 90

The following goods for use in manufacture of

10%

1

 

 

 

 

cellular mobile phones, namely :-

 

 

 

 

 

 

(i)

Microphone Rubber Case

 

 

 

 

 

 

(ii)

Sensor   Rubber   Case   /   Sealing  Gasket

 

 

 

 

 

 

 

including  sealing  gaskets  /  cases  from

 

 

 

 

 

 

 

Rubbers like SBR, EPDM, CR, CS, Silicone

 

 

 

 

 

 

 

and   all   other   individual   rubbers   or

 

 

 

 

 

 

 

combination / combination of rubbers

 

 

 

 

2.

7318 15 00

Screw  for  use  in  manufacture  of  cellular  mobile

10%

1

 

 

 

 

phone

 

 

 

 

 

 

 

 

 

 

 

3.

7326 90 99

SIM socket / Other Mechanical items (Metal) for use

10%

1

 

 

 

 

in manufacture of cellular mobile phones

 

 

 

 

 

 

 

 

 

 

 

4.

8517 12

Telephones for other wireless networks, other than

Nil

-

 

 

 

 

cellular networks

 

 

 

 

 

 

 

 

 

 

 

 

5.

8517 70 90

(a)

All goods other than the parts of cellular mobile

Nil

-

 

 

 

 

 

phones

 

 

 

 

 

 

(b)

Inputs or sub-parts for use in manufacture of parts

 

 

 

 

 

 

 

mentioned at (a) above

 

 

 

 

6.

Any Chapter

(a)

The following goods for use in manufacture of

Nil

1

 

 

 

 

 

cellular mobile phones, namely :-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(i)

Printed Circuit Board Assembly (PCBA)

 

 

 

 

(ii)

Camera Module

 

 

 

 

(iii)

Connectors

 

 

 

 

(iv)

Display Assembly

 

 

 

 

(v)

Touch Panel / Cover Glass Assembly

 

 

 

 

(vi)

Vibrator Motor / Ringer

 

 

 

 

(b) Inputs or parts for  use  in  manufacture  of items

Nil

1

 

 

mentioned at (a) above

 

 

 

 

(c)  Inputs or sub-parts for use in manufacture of parts

Nil

1

 

 

mentioned at (b) above

 

 

 

 

 

 

 

 

7.

Any Chapter

Inputs  or

raw material for  use  in  manufacture  of

Nil

1

 

 

following parts of Cellular mobile phones;

 

 

 

 

(i)

Charger or adapter

 

 

 

 

(ii)

Battery pack

 

 

 

 

(iii)

Wired Headset

 

 

 

 

(iv)

Battery cover

 

 

 

 

(v)

Front cover

 

 

 

 

(vi)

Front cover (with Zinc Casting)

 

 

 

 

(vii)

Middle cover

 

 

 

 

(viii)

GSM Antenna / Antenna of any

 

 

 

 

 

technology

 

 

 

 

(ix)

Side Key

 

 

 

 

(x)

Main Lens

 

 

 

 

(xi)

Camera Lens

 

 

 

 

(xii)

Screw

 

 

 

 

(xiii)

Microphone Rubber Case

 

 

 

 

(xiv)

Sensor  Rubber  Case  /  Sealing  Gasket

 

 

 

 

 

including  sealing  gaskets  /  cases  from

 

 

 

 

 

Rubbers  like  SBR,  EPDM,  CR,  CS,

 

 

 

 

 

Silicone and all other individual rubbers

 

 

 

 

 

or combination / combination of rubbers

 

 

 

 

(xv)

PU case / Sealing Gasket – Other articles

 

 

 

 

 

of   Polyurethane   foam   like   sealing

 

 

 

 

 

gaskets / case

 

 

 

 

(xvi)

Sealing Gaskets  /  Cases  from PE,  PP,

 

 

 

 

 

EPS,   PC   and   all   other   individual

 

 

 

 

 

polymers or combination / combination

 

 

 

 

 

of polymers

 

 

 

 

(xvii)

SIM socket / Other Mechanical items

 

 

 

 

 

(Metal)

 

 

 

 

(xviii)

SIM Socket / Other Mechanical items

 

 

 

 

 

(Plastic)

 

 

 

 

(xix)

Back Cover

 

 

 

 

(xx)

Conductive Cloth

 

 

 

 

(xxi)

Heat Dissipation Sticker Battery Cover

 

 

 

 

(xxii)

Sticker-Battery Slot

 

 

 

 

(xxiii)

Protective Film for main Lens

 

 

 

 

(xxiv)

Mylar for LCD FPC

 

 

 

 

 

 

 

 

 

 

 

(xxv)

LCD Conductive Foam

 

 

 

 

(xxvi)

Film-Front Flash

 

 

 

 

(xxvii)

LCD Foam

 

 

 

 

(xxviii)

BT Foam

 

 

 

 

(xxix)

Microphone and Receiver

 

 

 

 

(xxx)

Key Pad

 

 

 

 

(xxxi)

USB Cable

 

 

 

 

 

 

 

 

8.

Any Chapter

Inputs  or

raw material for use  in manufacture of

Nil

1

 

 

following goods namely :-

 

 

 

 

(i)

Other machines capable of connecting to

 

 

 

 

 

an automatic data processing machine or

 

 

 

 

 

to a network (8443 32 90)

 

 

 

 

(ii)

Ink cartridges, with print head assembly

 

 

 

 

 

(8443 99 51)

 

 

 

 

(iii)

Ink   cartridges,   without   print   head

 

 

 

 

 

assembly (8443 99 52)

 

 

 

 

(iv)

Ink spray nozzle (8443 99 53)

 

 

 

 

(v)

Base stations (8517 61 00)

 

 

 

 

(vi)

All goods falling under tariff item 8517

 

 

 

 

 

62 90

 

 

 

 

(vii)

All goods falling under tariff item 8517

 

 

 

 

 

69 90

 

 

 

 

 

 

 

 

 

 

ANNEXURE

 

 

Condition                                                                              Conditions

 

No.

 

  1. 1.                        If the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty) Rules, 2017.

 

 

 

 

This notification shall come into force with effect from the 1st day of July, 2017.

 

 

 

 

[F.No.354/20/2017-TRU]

 

 

 

 

(Mohit Tewari)

 

Under Secretary to the Government of India


Comments


HENDRY: dear Sir, as per condition need to produce intimation of annexure from importer OR annexure need to get endorsement in specific format from central excise. please clarify Regards, Hendry

Discussion Forum

You can also share your thoughts about this article.
Any one can answer on question posted by Readers